Products
-
Fully Automatic Cooking Oil Filling Machine
Suitable for fill: Edible Oil / Cooking OIl / Sunflower Oil / Oil kinds
Filling Bottle Range: 50ml -1000ml 1L -5L 4L -20L
Capacity is available: from 1000BPH-6000BPH (basic on 1L )
-
Idustrial RO Pure Water Treatment Equipment
From the beginning of water source water intake equipment to product water packaging, all wading equipment and its own pipelines and pipe valves are equipped with CIP cleaning circulating circuit, which can realize the complete cleaning of each equipment and each section of pipeline. CIP system itself meets the health requirements, can self circulate, sterilization is controllable, and the flow, temperature, characteristic water quality of circulating liquid can be detected online.
-
Clean in place automatic CIP system
Cleaning in place (CIP) is a set of procedures used to properly clean processing equipment without removing piping or equipment.
System compose by tanks, valve, pump, heat exchange , steam control, PLC control.
Structure: 3-1 monoblock for small flow, separate tank for each acid/alkali/water.
Widely apply for dairy, beer, beverage etc food industry.
-
Carbonated soft drink preparing system
It widely used in candy, pharmacy, dairy food, pastry, drink, can ect, also can be used in large restaurant or dining room to boil soup, cook, stew, boil congee, etc.. it is a good equipment of the food processing to improve quality, shorten the time, improve working conditions.
-
Juice mixing blending and preparing system
It widely used in candy, pharmacy, dairy food, pastry, drink, can ect, also can be used in large restaurant or dining room to boil soup, cook, stew, boil congee, etc.. it is a good equipment of the food processing to improve quality, shorten the time, improve working conditions.
Function: to preparing the syrup.
-
Full Automatic PET Bottle Rotary Unscrambler
This machine is used for the sorting of disordered polyester bottles. The scattered bottles are sent to the bottle storage ring of the bottle unscrambler through the hoist. By the thrust of the turntable, the bottles enter the bottle compartment and position themselves. The bottle is arranged so that the mouth of the bottle is upright, and its output into the following process through the air-driven bottle conveying system. The material of the machine body is made of high-quality stainless steel, and other parts are also made of non-toxic and durable series materials. Some imported parts are selected for the electrical and pneumatic systems. The whole working process is controlled by PLC programming, so the equipment has a low failure rate and high reliability.
-
Automatic Bottle Spray Warming Cooling Tunnel
The bottle warming machine adopts a three-section steam recycling heating design, the water spraying water temperature shall be controlled at around 40 degrees. After the bottles go out, the temperature will be around 25 degrees. Users can fix the temperature according to their needs. All the end of the warmer, it is equipped with a drying machine to blow the water outside the bottle.
It is equipped with a temperature control system. Users can adjust the temperature by themselves.
-
Flat Conveyor For Bottle
Except support arm etc. which are made of plastic or rilsan material, other parts are made of SUS AISI304.
-
Air Conveyor For Empty Bottle
Air conveyor is a bridge between the unscrambler/blower and 3 in 1 filling machine. Air conveyor is supported by the arm on the ground; the air blower is settled on the air conveyor. Each inlet of air conveyor has an air filter to prevent dust coming into. Two set of photoelectric switch settled in the bottle inlet of the air conveyor. The bottle is transferred to 3 in 1 machine through wind.
-
Full Automatic Elevato Cap Feeder
It’s specially use for elevate bottle caps so supply the capper machine using. It is use with capper machine together, if change some part it is also can use for other hardware goods elevate and feeding, one machine can more use.
-
Bottle Inverse Sterilize Machine
This machine is mainly used for PET bottle hot filling technology, this machine will sterilize the caps and bottle mouth.
After filling and sealing, the bottles will be auto turned 90°C by this machine to flat,the mouth and caps will be sterilized by its own inner thermal medium . It uses the import chain which is stable and reliable without damage to the bottle, the speed of transmission can be adjustable.
-
Food beverage Bottles Laser Code Printer
1. Fly desgin , specially designed for industrial coding solutions.
2. Small in size , which can meet with narrow working environment.
3. Fast speed, High performance
5. Adopting good laser source , steady& reliable.
6. One touch screen operating system , easy &convinent for use.
7. Fast after-sale response, to save your worries and rise productivity.
